QLogic FC ESX Command Line Interface (CLI) Plug-in Release Notes Marvell Semiconductor Inc All rights reserved. Table of Contents 1. Change History 2. Known Issues 3. Notices 4. Contacting Support 1. Changes History QLogic FC ESXCLI Plug-in Version 1.0.43: --------------------------------------------------------------- * Fixed target scmstats command failure for NVMe targets QLogic FC ESXCLI Plug-in Version 1.0.42: --------------------------------------------------------------- * Fixed apps initialization delay issue with NVMe targets * Updated FC only quapi library. * Updated SDMAPI v1.03 build 49. QLogic FC ESXCLI Plug-in Version 1.0.41: --------------------------------------------------------------- * Added NVMe target/LUN support. * Added Product Type display support in target info command. * Block Boot config settings for NVMe targets. * Updated FC only quapi library. QLogic FC ESXCLI Plug-in Version 1.0.40: --------------------------------------------------------------- * Added FCode update support for ISP28XX adapters. * Updated FC only quapi library. QLogic FC ESXCLI Plug-in Version 1.0.39: --------------------------------------------------------------- * Added support for new adapters. * Return failure for SCM commands when SCM feature is disabled in NVRAM. * Renamed lockdown flags in port info command. * Display additional fields in target info command. * Updated FC only quapi library. QLogic FC ESXCLI Plug-in Version 1.0.38: --------------------------------------------------------------- * Changed SCM stats display to param_name:value format. * Updated SDMAPI v1.03 build 45. QLogic FC ESXCLI Plug-in Version 1.0.37: --------------------------------------------------------------- * Changed SCM stats display to Name-Value pair format. * Added checks to validate user provided string in adapter commands. * Added checks to validate user provided string in port commands. * Added Universal SAN Congestion Management (USCM) Phase 2 support. * Updated SDMAPI v1.03 build 44. * Updated FC only quapi library. QLogic FC ESXCLI Plug-in Version 1.0.36: --------------------------------------------------------------- * Added unsupported driver/firmware display for lockdown params in port info command. * Fixed Personality display issue for FC only ISP2031 based adapters. * Added ACE-SP ISP2261 based adapter support. * Updated FC only quapi library. QLogic FC ESXCLI Plug-in Version 1.0.35: --------------------------------------------------------------- * Added lockdown feature support. * Updated SDMAPI v1.03 build 43. * Updated FC only quapi library. QLogic FC ESXCLI Plug-in Version 1.0.34: --------------------------------------------------------------- * Fixed multiple targets display issue. * Allow space separated Product ID values in Lun info. * Updated FC only quapi library. QLogic FC ESXCLI Plug-in Version 1.0.33: --------------------------------------------------------------- * Added PLDM image update support. * Updated SDMAPI v1.03 build 42. * Updated FC only quapi library. QLogic FC ESXCLI Plug-in Version 1.0.32: --------------------------------------------------------------- * Display flash component versions (MPI FW, PEP FW, PEP Board Cfg, FW Preload table, FC Board Cfg, MPI SoftROM, PEP SoftROM, PCIe Serdes) * Allow SCM for 32 Gbps Baker/Qlipper adapters. * Added support to update NVRAM using dat file at port level. * Added FW Preload Table, FC Board Config and FC PEP Config update support. * Allow 8 - 65535 bytes buffer size for loopback test. * Updated FC only quapi library. QLogic FC ESXCLI Plug-in Version 1.0.31: --------------------------------------------------------------- * Added CT Ping and CT FC Trace Route Diagnostics test support. * Added FC Ping and FC Echo ELS Diagnostics test support. * Added Read Diagnostics Parameters (RDP) support. * Added Loopback Diagnostics test support. * Added Read/Write Buffer test support. * Added new 27xx based IBM adapter support. * Updated FC only quapi library. QLogic FC ESXCLI Plug-in Version 1.0.30: --------------------------------------------------------------- * Identify Boot-From-SAN based on boot config settings of the port. QLogic FC ESXCLI Plug-in Version 1.0.29: --------------------------------------------------------------- * Allow diagnostics port config enable only in non-Boot-From-SAN mode. * Allow diagnostics port run command in non-Boot-From-SAN mode with port speed 16 Gbps or more. QLogic FC ESXCLI Plug-in Version 1.0.28: --------------------------------------------------------------- * Added Diagnostics port commands support QLogic FC ESXCLI Plug-in Version 1.0.27: --------------------------------------------------------------- * Added new 27xx based H3C and ZTE adapter support. * Renamed "Current Events" and "Delivery Reason" to "Congestion Notification" and "Delivery Notification" in SCM stats. * Display “Unknown” string for Unknown event type in SCM stats. * Display “Reserved” string for undefined events in SCM stats. * Display "Alarm" string and "None" string for Congestion Severity in SCM stats. QLogic FC ESXCLI Plug-in Version 1.0.26: --------------------------------------------------------------- * Allow Personality display command for all FC/CNA adapters * Add HBA Parameters "Save" command support * Display comma separated current events value for SCM stats when multiple events present * Updated SDMAPI v1.03 build 41 * Updated FC only quapi library * Built 64-bit package with 7.0.0-15843807 dev kits QLogic FC ESXCLI Plug-in Version 1.0.25: --------------------------------------------------------------- * Added SAN Congestion Management (SCM) statistics support at port and target level. * Added Enable SCM HBA Parameter support. * Updated SDMAPI v1.03 build 40. * Updated FC only quapi library. * Built 64-bit package with 7.0.0-15525992 dev kits QLogic FC ESXCLI Plug-in Version 1.0.24: --------------------------------------------------------------- * Added new 28xx based adapter support. * Fixed boot config issue. * Updated FC only quapi library. QLogic FC ESXCLI Plug-in Version 1.0.23: --------------------------------------------------------------- * Add Apps Tool ID in aux image region for 28xx adapters. * Updated FC only quapi library. QLogic FC ESXCLI Plug-in Version 1.0.22: --------------------------------------------------------------- * Add Restore Defaults support. * Add Get Firmware Dump support. * Add Get/Set Beacon support. * Updated SDMAPI v1.03 build 39. * Updated FC only quapi library. QLogic FC ESXCLI Plug-in Version 1.0.21: --------------------------------------------------------------- * Display PCI Bus Max/Negotiated Width and Speed values in Port info command * Allow FEC settings for non-mezz adapters with 16Gbps or unknown speed adapters. * Block FEC for FCoE mode. * Added new 28xx device ids. * Updated FC only quapi library. QLogic FC ESXCLI Plug-in Version 1.0.20: --------------------------------------------------------------- * Fix secondary aux region checksum error seen with 28xx adapters. * Updated FC only quapi library. QLogic FC ESXCLI Plug-in Version 1.0.19: --------------------------------------------------------------- * Allow FEC settings only for 16Gbps and unknown speeds * Added FC Boot Config settings support QLogic FC ESXCLI Plug-in Version 1.0.18: --------------------------------------------------------------- * Fixed primary/secondary region toggle issue for 28xx based adapters for flash, BBCR, FEC and HBA Parameters update. * Updated FC only quapi library. QLogic FC ESXCLI Plug-in Version 1.0.17: --------------------------------------------------------------- * Add new 28xx based device-ids support. * Fixed Klocwork static analysis reported issues. * Updated SDMAPI v1.03 build 37. * Updated FC only quapi library. QLogic FC ESXCLI Plug-in Version 1.0.16: --------------------------------------------------------------- * Add Forward-Error-Correction (FEC) feature support. * Add Buffer-to-Buffer Credits (BBCR) feature support. * Updated SDMAPI v1.03 build 36. QLogic FC ESXCLI Plug-in Version 1.0.15: --------------------------------------------------------------- * Add Personality Change (FC/CNA) support for ISP2031/ISP8031 based adapters. * Add LunsPerTarget HBA Parameter support. * Add Temperature display support for 16GB and above speed supported adapters. * Allow only 10GB speed in CNA mode in HBA Parameters. * Updated FC only quapi library. QLogic FC ESXCLI Plug-in Version 1.0.14: --------------------------------------------------------------- * Fixed NPIV port display issue. * Updated FC only quapi library. QLogic FC ESXCLI Plug-in Version 1.0.13: --------------------------------------------------------------- * Fixed Principal Fabric WWN and Adjacent Fabric WWN display issue in port info command. * Updated SDMAPI v1.03 build 35. * Updated FC only quapi library built with VMware toolchain. QLogic FC ESXCLI Plug-in Version 1.0.12: --------------------------------------------------------------- * Display Principal Fabric WWN and Adjacent Fabric WWN in port info command. * Updated SDMAPI v1.03 build 34. * Updated quapi library. QLogic FC ESXCLI Plug-in Version 1.0.11: --------------------------------------------------------------- * Read MPI and PEP versions based on active image set. * Avoid extra driver bootcode and fw version update call for 28xx adapters. * Updated SDMAPI v1.03 build 33. QLogic FC ESXCLI Plug-in Version 1.0.10: --------------------------------------------------------------- * Use different speed definitions for PortSpeed and PortSupportedSpeed values. * Updated SDMAPI v1.03 build 32. * Updated quapi library. QLogic FC ESXCLI Plug-in Version 1.0.9: --------------------------------------------------------------- * Added VMware namespace and OS version dependencies for Vmware ESX versions. * Updated SDMAPI v1.03 build 28. * Updated quapi library. QLogic FC ESXCLI Plug-in Version 1.0.8: --------------------------------------------------------------- * Added Maximum Speed display support * Set Data Rate value in HBA Parameters based on supported speed values for an adapter * Display flash update error messages for each error code QLogic FC ESXCLI Plug-in Version 1.0.7: --------------------------------------------------------------- * Added Set HBA Parameters support QLogic FC ESXCLI Plug-in Version 1.0.6: --------------------------------------------------------------- * Removed Set HBA Parameters support QLogic FC ESXCLI Plug-in Version 1.0.5: --------------------------------------------------------------- * Added FC VPD Display support. * Added Get/Set HBA Parameters support. QLogic FC ESXCLI Plug-in Version 1.0.4: --------------------------------------------------------------- * Added SFP DMI information support. * Added FC Port Statistics support. * Updated SDMAPI v1.03 build 25. QLogic FC ESXCLI Plug-in Version 1.0.3: --------------------------------------------------------------- * Added target list and target information support. * Added LUN list and LUN information support. QLogic FC ESXCLI Plug-in Version 1.0.2: --------------------------------------------------------------- * Added port list and port information support. * Fixed flash update issues QLogic FC ESXCLI Plug-in Version 1.0.1: --------------------------------------------------------------- * Supports adapter information on classic-Q family of adapters. * Fixed dependent library load issues due to stack executable flag. QLogic FC ESXCLI Plug-in Version 1.0.0: --------------------------------------------------------------- * Initial release * Supports discovery and flash update on classic-Q family of adapters. 2. Known Issues * None. 3. Notices Information furnished in this document is believed to be accurate and reliable. However, Cavium Corporation assumes no responsibility for its use, nor for any infringements of patents or other rights of third parties which may result from its use. Cavium Corporation reserves the right to change product specifications at any time without notice. Applications described in this document for any of these products are only for illustrative purposes. Cavium Corporation makes no representation nor warranty that such applications are suitable for the specified use without further testing or modification. Cavium Corporation assumes no responsibility for any errors that may appear in this document. 4. Contacting Support For further assistance, contact Marvell QLogic Technical Support at: https://www.marvell.com/support.html Trademarks Accelera, Accelerating Cluster Performance, InfiniCon Systems, InfiniNIC, InfiniPath, InfiniView, QLA, QLogic, the QLogic logo, ReadyPath, SANdoctor, SANsurfer, and SilverStorm are registered trademarks of Cavium Corporation. All other brand and product names are trademarks or registered trademarks of their respective owners. (c) Copyright 2016-2021. All rights reserved worldwide. QLogic, the QLogic logo, and the Powered by QLogic logo are registered trademarks of Marvell Semiconductor Inc. All other brand and product names are trademarks or registered trademarks of their respective owners.