QConvergeConsole CLI Release Notes
           Marvell Semiconductor, Inc

              All rights reserved


Table of Contents

1. Change History
2. Known Issues
3. Notices
4. Contacting Support


1. Change History


The following changes have been made to the QConvergeConsole Command
Line Utility (QCC CLI), version 2.4.0 build 20.

General
-------

    Bug Fixes:

	* Fix an issue that prevents user to exit the application from HBA
      information menu in a host without any HBA installed (#148286).

	* Fix incorrect NVMe LUN size for small (in MBs) and large (in TBs) LUNs.
      Requires Linux SDMAPI v6.04 build 69 (#148272).

	* Fix a flash update issue on 27xx adapter with UOS OOB driver.
	  Requires Linux SDMAPI v6.04 build 70 (#148268).
	
	* Fix incorrect HBA USCM last event status when running USCM statistics
      with previous release driver (#148248).

	* Fix incorrect target wwpn display with NPIV port in
      interactive mode (#148210).

	* Application starts up delay with NVMe targets.
	  Requires Linux SDMAPI v6.04 build 68 or latest (#148178).

	* Application starts up delay with isolated HBA port (Linux).
      Requires Linux SDMAPI v6.04 build 65 or latest.

	* Fix segmented crash in USCM statistics with RHEL 8.4 inbox driver (#147986).

	* Fix memory related issue to HBA_RemoveCallback and
	  HBA_RegisterForAdapterPortEvents SNIA API (#147956).


	New Features:

	* Firmware Update Lockdown.
    * Universal SAN Congestion Management.
	* StorCryption Configuration Management.

    Changes:

	* Enable FC ELS ping support for QLE25xx adapter (#148218).


2. Known Issues

Ethernet
--------

   * DCBX/ETS/TLV not supported - Requires driver support
   * Flow control configuration/display not supported
   * 8300 Series Adapters NIC ESX Limited Support:
   * Statistics not supported

FC/FCOE
-------

   * VP create/delete issues when > 16 (Linux with attached targets).
   * LB test failures (Across all platforms on larger un-zoned
     configs).
   * LB test is displayed for certain type P3P card
   * BFS: Internal Loopback fails when the port is connected to SAN
     (ER 102644).

iSCSI
-----
   * Link config window not supported
   * 8300 Series Adapters iSCSI Linux limited Support:
     DCBX/ETS/TLV not supported
     Statistics not supported
     Unable to set device timeouts and auto-connect (possible driver
     issue)

3. Limitations

FC
-------

   * NVME (Linux):

        1.  sg3_utils v1.43 and above is required to support NVME target/LUN info.
		2.  Target Vendor, Product ID and Product Revision fields of size 8 bytes,
     		16 bytes and 4 bytes are supported as per SCSI Inquiry command.
			NVME targets may have bigger size strings which will get truncated.
        3.  Target PortID is 00-00-00.
        4.	WWULN (World-Wide-Unique-LUN-Number) in LUN info is not supported.
        5.	iiDMA settings are not supported.
        6.	LUN Persistent Names feature is not supported.
        7.	NVME targets/LUNs are not supported for SNIA HBA APIs and HP RUBAH APIs.
        8.	Diagnostics CT ping and CT FTR tests with NVMe targets are not supported.
        9.	Boot-From-SAN with NVMe target is not supported.
        10.	NVME targets is detected only when minimum one namespace is present.

4. Notices

Information furnished in this document is believed to be accurate and
reliable. However, Marvell, Inc assumes no responsibility for
its use, nor for any infringements of patents or other rights of
third parties which may result from its use. Marvell, Inc
reserves the right to change product specifications at any time
without notice. Applications described in this document for any of
these products are only for illustrative purposes. Marvell, Inc
makes no representation nor warranty that such applications are
suitable for the specified use without further testing or
modification. Marvell, Inc assumes no responsibility for any
errors that may appear in this document.

5. Contacting Support

   For further assistance, contact Marvell Technical Support at:
   https://www.marvell.com/support/


Copyright (c) (2021) Marvell.
All rights reserved.

This file is subject to the limited use license agreement by and between Marvell and you,
your employer or other entity on behalf of whom you act. In the absence of such license
agreement the following file is subject to Marvell’s standard Limited Use License Agreement.