============================ R E L E A S E N O T E S ============================ QLogic QCS command line interface utility for Linux Copyright (c) 2019 Marvell Semiconductor Inc. All rights reserved. Version 40.0.61.0 (Dec 11, 2019) ----------------------------------- Fix for Cont00107408 Fix for Cont00107795 Fix for Cont00107796 Fix for Cont00107839 Fix for Cont00107842 Version 40.0.60.0 (Oct 16, 2019) ----------------------------------- Fix for Cont00107400 Version 40.0.59.0 (Oct 04, 2019) ----------------------------------- Fix for Cont00107230 Version 40.0.58.0 (Aug 23, 2019) ----------------------------------- Fix for Cont00106627 Fix for Cont00106779 Fix for Cont00106781 Fix for Cont00107027 Version 40.0.57.0 (July 30, 2019) ----------------------------------- Fix for Cont00106779 Fix for Cont00106601 Fix for Cont00106777 Fix for Cont00106783 Fix for Cont00106635 Fix for Cont00106634 Fix for Cont00106759 Fix for Cont00106721 Fix for Cont00106815 Version 40.0.56.0 (July 18, 2019) ----------------------------------- Fix for Cont00106357 Fix for Cont00106381 Fix for Cont00106465 Fix for Cont00106539 Fix for Cont00106555 Fix for Cont00106627 Fix for Cont00106630 Fix for Cont00106697 Version 40.0.55.0 (May 30, 2019) ----------------------------------- Fix for Cont00106250 Fix for Cont00106251 Fix for Cont00106257 Fix for Cont00106233 Fix for Cont00105352 Version 40.0.54.0 (May 23, 2019) ----------------------------------- Fix for Cont00106168 Fix for Cont00105352 Version 40.0.53.0 (Apr 25, 2019) ----------------------------------- Fix for Cont00105986 Fix for Cont00105979 Fix For Cont00105352 Version 40.0.52.0 (Apr 04, 2019) ----------------------------------- Fix for Cont00105751 Fix for Cont00105754 Version 40.0.51.0 (Mar 26, 2019) ----------------------------------- Fix for Cont00105636 Fix For Cont00105614 Version 40.0.50.0 (Mar 20, 2019) ----------------------------------- Fix For Cont00105269 Fix For Cont00105268 Fix for Cont00105436 Version 40.0.49.0 (Feb 26, 2019) ----------------------------------- Fix For Cont00105241 Fix For Cont00105245 Version 40.0.48.0 (Feb 13, 2019) ----------------------------------- Fix For Cont00104735 Version 40.0.47.0 (Jan 31, 2019) ----------------------------------- Fix For Cont00104735 Version 40.0.46.0 (Jan 29, 2019) ----------------------------------- Fix For Cont00104901 Fix For Cont00104735 Version 40.0.45.0 (Jan 22, 2019) ----------------------------------- Fix For Cont00104855 Fix For Cont00104867 Version 40.0.44.0 (Jan 10, 2019) ----------------------------------- Fix For Cont00104768 Fix For Cont00104740 Version 40.0.43.0 (Dec 18, 2018) ----------------------------------- Fix For Cont00098741 Fix For Cont00104699 Relro Added. Version 40.0.42.0 (Dec 12, 2018) ----------------------------------- Fix for Cont00104498 Version 40.0.41.0 (Nov 27, 2018) ----------------------------------- Fix for Cont00104459 Version 40.0.40.0 (Nov 16, 2018) ----------------------------------- Fix for Cont00104417 Version 40.0.39.0 (Nov 14, 2018) ----------------------------------- UEFI boot mode Support. Version 40.0.38.0 (Oct 31, 2018) ----------------------------------- Fix for Cont00104193 Fix for Cont00104175 Version 40.0.37.0 (Oct 23, 2018) ----------------------------------- Fix for Cont00104089 Version 40.0.36.0 (Oct 17, 2018) ----------------------------------- Fix For Cont00103963. Version 40.0.35.0 (Oct 15, 2018) ----------------------------------- Fix For Cont00103911. Fix For Cont00103750. Version 40.0.34.0 (Oct 09, 2018) ----------------------------------- Fix For Cont00103900. Version 40.0.33.0 (SEP 26, 2018) ----------------------------------- Fix For Cont00103413. Fix For Cont00103601. Fix For Cont00103620. Version 40.0.32.0 (SEP 20, 2018) ----------------------------------- Fix For Cont00103368. Fix For Cont00103361. Fix For Cont00103367. Version 40.0.31.0 (AUG 29, 2018) ----------------------------------- Fix For Cont00103120. Version 40.0.30.0 (AUG 16, 2018) ----------------------------------- Fix For Cont00103001. Fix for Cont00103018. Version 40.0.29.0 (AUG 08, 2018) ----------------------------------- Fix For Cont00102958. Version 40.0.28.0 (AUG 03, 2018) ----------------------------------- Optimization for SmartAN commands Version 40.0.27.0 (JUL 26, 2018) ----------------------------------- Fix For Cont00102800 Version 40.0.26.0 (JUL 19, 2018) ----------------------------------- Fix For Cont00102698 Version 40.0.25.0 (JUL 11, 2018) ----------------------------------- Fix For Cont00102636 Fix For Cont00102457 Version 40.0.24.0 (JUL 09, 2018) ----------------------------------- Fix For Cont00101375 Fix For Cont00102457 Version 40.0.23.0 (JUN 22, 2018) ----------------------------------- Fix For Cont00101723 Fix For Cont00101861 Version 40.0.22.0 (JUN 05, 2018) ----------------------------------- Fix For Cont00101723 Fix For Cont00101801 Fix For Cont00101793 Fix for Cont00101874 Fix for Cont00101878 Fix for Cont00101886 Fix for Cont00101989 Version 40.0.21.0 (MAY 25, 2018) ----------------------------------- Fix For Cont00101723 Fix For Cont00101801 Fix For Cont00101793 Version 40.0.20.0 (MAY 21, 2018) ----------------------------------- Fix For Cont00101320 Fix For Cont00101595 Fix For Cont00101636 Fix For Cont00101746 Version 40.0.19.0 (MAY 05, 2018) ----------------------------------- Fix for Cont00101320 Fix for Cont00101326 Fix for Cont00101418 Fix for Cont00101419 Fix for Cont00101455 Version 40.0.18.0 (APR 26, 2018) ----------------------------------- Fix For Cont00101353. Fix for Cont00101318 Fix for Cont00101296 Fix for Cont00101283 Fix for Cont00101280 Fix for Cont00100996 Version 40.0.17.0 (APR 11, 2018) ----------------------------------- Fix for Cont00101022. Fix for Cont00100868. Fix for Cont00100845. Fix for Cont00100762. Fix for Cont00100518. Fix for Cont00100440. Version 40.0.16.0 (MAR 21, 2018) ----------------------------------- Fix for Cont00100440. Fix for Cont00100518. Fix for Cont00100481. Fix for Cont00100467. Version 40.0.15.0 (MAR 09, 2018) ----------------------------------- Fix for Cont00100232. Fix for Cont00100226. Version 40.0.14.0 (MAR 01, 2018) ----------------------------------- Fix for Cont00100138. Updated validations for VLANTableConfig Version 40.0.13.0 (Feb 15, 2018) ----------------------------------- Blocked NPAR-config for specific OEM Adapters Fix for iSCSI Boot Config Issue Version 40.0.12.0 (Feb 08, 2018) ----------------------------------- Fix for Cont00099375. Fix for Cont00099378. Version 30.0.104.0 (Feb 06, 2018) ----------------------------------- Fix for Cont00099378. Fix for Cont00099441 Fix for Cont00099375. Version 30.0.103.0 (Jan 24, 2018) ----------------------------------- Fix for Cont00098953. Fix for Cont00099141. Fix for Boot Config validations. Version 30.0.102.0 (Jan 19, 2018) ----------------------------------- Fix for Cont00099148 Version 30.0.101.0 (Jan 17, 2018) ----------------------------------- Fix for Cont00097753 Version 30.0.100.0 (Jan 12, 2018) ----------------------------------- Fix for Cont00098954 Fix For Cont00097753 Version 30.0.99.0 (Jan 08, 2018) ----------------------------------- Fix for Cont00098706 Fix For Cont00098707 Version 30.0.98.0 (Dec 15, 2017) ----------------------------------- Added support for SmartAN in MBA Boot Config Version 30.0.97.0 (Dec 12, 2017) ----------------------------------- Fix for Cont00098293 Fix for Cont00097945 Added Fixes for PortMode configuration at Adapter level Version 30.0.96.0 (Dec 07, 2017) ----------------------------------- Fix for Cont00098293 Added support for PortMode configuration at Adapter level Updated NPAr support to allow function configs in sigle boot. Version 30.0.95.0 (Nov 09, 2017) ----------------------------------- Fix for Cont00097832 Version 30.0.94.0 (Nov 03, 2017) ----------------------------------- Fix for Blocking NPAR config for specific OEM Version 30.0.93.0 (Nov 02, 2017) ----------------------------------- Fix for Cont00097430 Version 30.0.92.0 (Oct 25, 2017) ----------------------------------- Fix for Cont00097426 Updated SmartAN Support - Not based on MediaType Version 30.0.91.0 (Oct 12, 2017) ----------------------------------- Fix for Cont00097292 Fix for E4-NPAR Preservation issues Fix for OEM iSCSI Boot config support Version 30.0.90.0 (Oct 04, 2017) ----------------------------------- Fix for E4-NPAR Preservation issues Fix for OEM iSCSI Boot config support Version 30.0.89.0 (Sept 25, 2017) ----------------------------------- Fix for AutoNeg support on E4 Adapter Version 30.0.88.0 (Sept 08, 2017) ----------------------------------- Fix For Cont00096240. Fix For Cont00096310. Version 30.0.87.0 (Aug 24, 2017) ----------------------------------- Fix For Cont00096184. Version 30.0.86.0 (Aug 09, 2017) ----------------------------------- Fix For Cont00095720. Fix For Cont00095756. Fix For Cont00095807. Version 30.0.85.0 (Aug 01, 2017) ----------------------------------- Fix For Cont00095190. Fix For Cont00095404. Version 30.0.84.0 (Jul 14, 2017) ----------------------------------- Fix For Cont00095122. Fix For Cont00095124. Fix For Cont00095167. Fix For Cont00095125. Version 30.0.83.0 (Jun 30, 2017) ----------------------------------- Fix For Cont00094298. Fix For Cont00094739. Version 30.0.82.0 (Jun 27, 2017) ----------------------------------- Fix For Cont00094910. Fix For Cont00094911. Version 30.0.81.0 (Jun 23, 2017) ----------------------------------- Fix For Cont00094740. Fix For Cont00094766. Fix For Cont00094837. Version 30.0.80.0 (Jun 21, 2017) ----------------------------------- Fix For Cont00094738. Fix For Cont00094761. Fix For Cont00094766. Version 30.0.79.0 (Jun 19, 2017) ----------------------------------- Fix for Cont00094735. Version 30.0.78.0 (Jun 14, 2017) ----------------------------------- Fix for Cont00094569. Version 30.0.77.0 (Jun 13, 2017) ----------------------------------- Added Quad Port Adapters Support Version 30.0.76.0 (Jun 09, 2017) ----------------------------------- Fix For Cont00094407. Fix For Cont00094424. Fix For Cont00094428. Fix For Cont00094264. Fix For Cont00096656. Fix For Cont00094248. Version 30.0.75.0 (Jun 02, 2017) ----------------------------------- Fix For Cont00094243. Fix For Cont00094248. Fix For Cont00094290. Fix For Cont00094264. Version 30.0.74.0 (May 26, 2017) ----------------------------------- Updated for SmartAN Features. Version 30.0.73.0 (May 16, 2017) ----------------------------------- Fix for Cont00093662. Fix for Cont00093867. Fix for Cont00093868. Version 30.0.72.0 (May 11, 2017) ----------------------------------- Fix for Cont00093569. Fix for Cont00093614. Fix for Cont00093621. Fix for Cont00093622. Fix for Cont00093623. Version 30.0.71.0 (May 02, 2017) ----------------------------------- Fix For Cont00093397. Fix For Cont00093424. Fix For Cont00093398. Fix For Cont00093322. Fix For Cont00093483. Fix For Cont00093558. Version 30.0.70.0 (April 02, 2017) ----------------------------------- Channel 2017E related changes. Version 30.0.69.0 (March 30, 2017) ----------------------------------- Fix for Cont00092887. Version 30.0.68.0 (March 25, 2017) ----------------------------------- Fixes: Fix for Cont00092803 Removing VBD from showing on Linux systems. Complete fix for Cont00092360. Version 30.0.67.0 (March 21, 2017) ----------------------------------- Fixes: Synchronizing with latest qlmapilnx. Removing AutoNeg option for 10G (non-BaseT AH adapters). Version 30.0.66.0 (March 07, 2017) ----------------------------------- Fixes: Fix for Cont00092262. Version 30.0.65.0 (February 28, 2017) ----------------------------------- Fixes: Correcting temperature display for 579XX family of adapters. Not allowing to configure storage in default mode for some OEM 579XX adapters. Version 30.0.64.0 (February 22, 2017) ----------------------------------- Fixes: Updated qlmapi picking up new nvm_cfg changes. Version 30.0.63.0 (January 26, 2017) ----------------------------------- Fixes: OEM specific AH related changes. Version 30.0.62.0 (January 26, 2017) ----------------------------------- Fixes: Fix for Cont00090860. Fix for Cont00090923. Fix for Cont00090884. Fix for the issue where iSCSI/FCoE function enablement options are not shown during NPAR config for 579XX family (AH) adapters. Fix for Cont00090884. Version 30.0.61.0 (January 07, 2017) ----------------------------------- Fixes: Fix for Resource Config Changes for 57800 family. Fix for intermittent incorrect temperature values on 579XX family. Version 30.0.60.0 (January 05, 2017) ----------------------------------- Fixes: Fix for CQ00090848. Fix for CQ00090845. Version 30.0.59.0 (December 23, 2016) ----------------------------------- Fixes: Fix for CQ90696. Version 30.0.58.0 (December 20, 2016) ----------------------------------- Fixes: Fix for crash during RPC connect. Supporting online diagnostics. Fix for Cont00089551. Version 30.0.57.0 (December 14, 2016) ----------------------------------- Fixes: Fix for crash during SFP query through RPC. Version 30.0.56.0 (December 8, 2016) ----------------------------------- Fixes: Added support for DMI data. Version 30.0.55.0 (December 2, 2016) ----------------------------------- Fixes: Fix the link speed enumeration in PXE boot for 579XX adapters. Version 30.0.54.0 (November 16, 2016) ----------------------------------- Fixes: More fixes for iSCSI IPv6 Bootcfg support for FastlinQ adapters Version 30.0.53.0 (November 16, 2016) ----------------------------------- Fixes: Use function capability mask during NPAR func protocol cfg. Fix iSCSI IPv6 Bootcfg support for FastlinQ adapters Version 30.0.52.0 (November 8, 2016) ----------------------------------- Fixes: Cont00088978 - QLMAPI needs to be expanded to look at NVM_CFG version info Enable iSCSI IPv6 Bootcfg support for FastlinQ adapters Version 30.0.51.9 (November 8, 2016) ----------------------------------- Fixes: Cont00089964 - In Earlier versions when we launched QCS GUI, Localhost was getting connected automatically. But now we have to manually add localhost. Cont00089967 - OS is crashing when starting Diagnostics test using QCSCLI on HP Queenie using Windows 2012 R2. Cont00089965 - channelu3e:QCScli_boot configuration command is unable to restore modified setting at port level Version 30.0.50.8 (October 30, 2016) ----------------------------------- Fixes: 1. Cont00089635 - Sessionstats for iSCSI sessions shows all zeros 2. Cont00089604 - Stats under L2nic view is showing as zero. 3. Cont00089713 - Unable to display/save SRIOV. 4. Cont00089714 - Unable to set advanced parameters values on SF mode. 5. Cont00089738 - Unable to change SF to MF and MF to SF on Dell Duluth using QCS CLI on Nano Server 6. Cont00089813 - Unable to change SRIOV Enable/Disable on E3 adapter using QCS CLI on Nano Server 7. Cont00089746 - Diagnostics test failing for both QCC GUI and QCS CLI only for MF Mode on HP QUEENIE 25G using Windows 2012 R2. 8. Cont00089734 - Lenovo 2016B: QCSCLI- UFP Mode-Diagnostics tests fails from application. 9. Cont00089811 - QCScli allows SF to NPAR and vice versa for HP QUEENIE adapter using RHEL 7.2 x64. Version 30.0.49 (October 13, 2016) ----------------------------------- Fixes: 1. Support for new adapter Version 30.0.48 (September 25, 2016) ----------------------------------- Fixes: 1. Cont00089079 - PXE params updated using QCScli does not reflect in HII 2. Cont00088863 - PXE can not be enabled via QCC GUI for QLE45212 physical 2nd port Version 30.0.47 (September 6, 2016) ----------------------------------- Fixes: 1. Cont00088722 - SR-IOV not configurable by QCS CLI for QL45212 2. Cont00088292 - E4 FCoE/iSCSI bootcfg does not work as expected in QCS Version 30.0.46 (August 26, 2016) ----------------------------------- Fixes: 1. Cont00088682 - QCS GUI is crashed when running diag (ping) test on teaming interface 2. Cont00087241 - System reboots while running Diagnostic test in NPAR mode 3. Cont00088638 - QCS does not display iSCSI HBA priority Version 30.0.45 (August 11, 2016) ----------------------------------- Fixes: 1. Cont00087241 - Retrying InitDiag on 579XX NPAR diag. 2. Cont00087468 - Link Speed Shown unknown in 579XX NPAR case. 3. Cont00088215 - Setting default min_bw to '1' instead of '0' 4. Cont00086756 - Media type initialized incorrectly in QLDMAPI. 5. Cont00088398 - Fixed version. Version 30.0.44 (July 27, 2016) ----------------------------------- Fixes: 1. Fix for CCont00087167 (QCS does not save/reflect TOE selection/setting). 2. Fix for Cont00087261 (Application fails to save the bootcfg file of iscsi, fcoe, mba in RHEL7.2) Version 30.0.43 (July 22, 2016) ----------------------------------- Fixes: 1. Fix for Cont00087572. 2. Fix for Cont00087576. 3. Fix for Cont00087677. 4. Fix for Cont00087690. Version 30.0.41 (July 07, 2016) ----------------------------------- Fixes: 1. Fix for Cont00087175 2. Enabled iscsi/fcoe bootcfg for E4 adapter. Version 30.0.40 (June 24, 2016) ----------------------------------- Fixes: 1. Add Help contents for iSER targets 2. Cont00077236: Fix missing slash for DataDigest string Version 30.0.39 (June 17, 2016) ----------------------------------- Fixes: 1. Only allow IPv4 iSCSI boot config for E4 2. Cont00077864 - QCS allows user to configure FCoE function on any function when system is in UFP mode Version 30.0.38 (June 10, 2016) ----------------------------------- Fixes: 1. Cont00085956 - IPv4 & IPv6 addresses not seen on QCScli on E3 adapter 2. Added ArrowHead IDs and ArrowHead PF check 3. Disabled enable/disable settings on PF 0/1 (avoid disabling the base functions) 4. Added CLI properties file functionality. Hide DCBX config with properties file Version 30.0.37 (June 3, 2016) ----------------------------------- Fixes: 1. Cont00078147 - QCScli not able to set iSCSI Initiator CHAP secret 2. Cont00086778 - QCScli shows "disconnected" status for RHEL 7.2 x64 when launched. 3. Add iSER support for Linux 4. Fixed missing Linux connected display Version 30.0.36 (May 25, 2016) ----------------------------------- Fixes: 1. Remove DCBX config for E4, not currently supported. Only supports info at this time 2. Enabled E4 default mode - Added check to make sure at least one protocol is enabled 3. Updated E4 NDIS stats 4. Cont00086740 - QCScli does not show "-mu" option for mutual CHAP in targets level command help in iSCSI 5. Cont00085466 - "Speed and Duplex" configuration parameter shows blank in QCSCLI on E3 NIC NPAR mode 6. Cont00086181: Do not return failure if send_targets node search fails Version 30.0.35 (May 13, 2016) ----------------------------------- Fixes: 1. Update special check to disable first 4 PFs on E4 based on driver version 2. Add E4 FCoE/iSCSi Boot config support 3. Removed MPIO params under iSCSI boot config 4. Fixed DCBX display/Non Op issue Version 30.0.34 (May 6, 2016) ----------------------------------- Fixes: 1. Cont00086362: Use and Show Mutual Chap Authentication if enabled 2. Cont00085783 - Logout not working properly for iSCSI testing with QCScli/qlnxremote 3. Removed invalid NDIS cfg commands 4. Cont00078077 - QCScli does not list iscsi discovery portals & isns servers 5. Fix iscsi login issue with RedHat Version 30.0.33 (April 29, 2016) ----------------------------------- Fixes: 1. Cont00077147 - FCoE configuration on linux does not give error 2. Enabled online diag for E4 Version 30.0.32 (April 22, 2016) ----------------------------------- Fixes: 1. Cont00086121 - Failed to create single/multiple virtual port in QCScli for FCoE in E4 card using RHEL 7.2 x64. 2. Cont00086178 - iSCSI ifaces file stores "iface.transport_name = bnx2i" instead of "qedi" from QCScli in E4 iSCSI IPv4 IFace Files using RHEL 7.2 x64. 3. Cont00086182 - Target logout at target level causes QCScli to crash with segmenttation fault fin E4 adapter using RHEL 7.2 x64 4. Cont00086183 - Logout at host level failed in QCScli for E4 adapter using RHEL 7.2 x64 5. Updated CLI NPAR save functionality 6. Cont00085784 - Portal Refresh Not working for iSCSI testing with QCScli/qlnxremote build for E4 Version 30.0.31 (April 14, 2016) ----------------------------------- Fixes: 1. Cont00077236 - QCScli: iscsi target information doesn't display the status appropriately for iscsi data digest Version 30.0.30 (April 8, 2016) ----------------------------------- Fixes: 1. Cont00078418 - QCS allows to configure Single function in certain setups 2. Cont00077608 - NPAR functions don't retain SRIOV config while switching MF to SF and revert using QCS GUI 3. Cont00086005 - Getting error while launching QCScli Version 30.0.29 (March 31, 2016) ----------------------------------- Fixes: 1. Cont00085899 - Disable allowing user to disable functions 0 - 7 on E4 2. Fixed IPv6 display issue Version 30.0.28 (March 28, 2016) ----------------------------------- Fixes: 1. Cont00078018 - QCScli does not show proper message for pingtest 2. Cont00078049 - QCScli has no IPv4/IPv6 option for discovering hosts Version 30.0.27 (March 24, 2016) ----------------------------------- Fixes: 1. Cont00085770 - NPAR EP option is missing in QCS Applications under Windows 2012 R2 OS Version 30.0.26 (March 17, 2016) ----------------------------------- Fixes: 1. Fixed E4 CLI target login failure 2. Fixed remove static target failure Version 30.0.25 (March 15, 2016) ----------------------------------- Fixes: 1. Fixed iSCSI target/portal functionality 2. Cont00085466 - "Speed and Duplex" configuration parameter shows blank in QCSCLI on E3 NIC NPAR mode using RHEL 7.2 x64 3. Fixed RPC delete VNPort 4. Fixed missing eVBD tab when nPAR is enabled Version 30.0.24 (March 11, 2016) ----------------------------------- Fixes: 1. Cont00085332 - QCScliPPC64LE: In MF mode, under port level, stats gives no output. 2. Cont00077983 - Boot configuration file saved from qcscli shows bacs header 3. Cont00085568 - QCS CLI fails to add target discovery portal 4. Cont00069883 - T7.8 BACS: Linux BACS CLI generates an error while trying to list VBD instances 5. Cont00070884: BACS4-Win: BACScli is not allowing to disable NDIS in NPAR mode 6. Cont00085559 - Boot config fails on QL 100G adapter with QCScli localhost Version 30.0.23 (March 8, 2016) ----------------------------------- Fixes: 1. Cont00085554 - issue w.r.t QCS CLI , gives segfault , while executing command two times 2. Added SRIOV support 3. Update GUI and CLI copyright date to 2016 4. Cont00074691 - MTU size is not validating for alphabet values entered after 4 digits in BACScli 5. Cont00085436 - Default value for Receive buffers on E3 adapter Version 30.0.22 (March 5, 2016) ----------------------------------- Fixes: 1. Performance Optimizations Version 30.0.21 (March 3, 2016) ----------------------------------- Fixes: 1. Cont00085400 - Adapter name for 10G/25G/100G differs between QCC GUI & QCScli 2. Cont00085175 - QCScli 32-bit gives trace while quitting Version 30.0.20 (February 26, 2016) ----------------------------------- Fixes: 1. Cont00085253 - QCScli: Readme notes file needs to be updated with all supported Operating systems 2. Cont00084979 - IP address info is not seen in QCScli for E3/E4 adapters 3. Cont00085248 - QCScliPPC64LE fails to launch in SELS12SP1 PPCLE64. 4. Cont00085184 - Multiple sriov issue with QCScli for QLogic E3 adapter 5. Cont00085084 - QCSCLI 30.0.17 displays non-default NDIS Advanced Parameters as default for on E3 6. Cont00085311 - QCScliPPC64LE shows "Interface" as "Down" even though the interface is "UP" under L2NIC level in PowerkvmPPC64LE 7. Cont00085219 - QCScliPPC64 is not setting the Receive Buffers value below 128 in SLES11SP4 PPC64 8. Cont00083662 - QCScli displays unwanted messge while launching Version 30.0.19 (February 22, 2016) ----------------------------------- Fixes: 1. Cont00085178 - QCCGUI is not asking for reboot when Max.Bandwidth Settings are changed on NPAR functions Version 30.0.18 (February 19, 2016) ----------------------------------- Fixes: 1. Cont00084978 - VPD info not seen in QCScli for QL 25G adapter 2. Cont00085075 - Delay in displaying list devcon info in QCSCLI 30.0.17 3. Cont00085111 - Unable to convert SF to MF using QCSCLI 30.0.17 4. Cont00084915 - NPAR config is showing incorrectly, should be 0-15 5. Cont00085020 - Current NDIS Adv. Param setting shows as Unknown and all params are displayed in digits after setting FlowControl on Windows Version 30.0.17 (February 15, 2016) ----------------------------------- Fixes: 1. Cont00084984 - QCS v30.0.16.0 app (32-bit) is crashing while closing on E3 adapters 2. Cont00084916 - QCSCLI doesn't throw error if NPAR BW is set other than 0 or 100 per port under Windows 3. Cont00084695 - For QL 25G adapter num of VFs option must be disabled 4. Cont00084907 - QCScliPPC64BE: Application shows MAC Loopback test is not support in RHEL7.2PPC BE 5. Cont00084958 - Wrong status shown in boot congig for few params 6. CQ 83599 iSCSI Ping Test fails on E4 Brussels using QCSCLI 30.0.7 under Windows 7. Cont00084970 - Not able to create any team in expert mode. 8. Cont00084979 - IP address info is not seen in QCScli for E3/E4 adapters 9. Cont00084706 - QCScliPPC64LE shows link speed is shown as 0 under port level in SLES12PPC64LE Version 30.0.16 (February 5, 2016) ----------------------------------- Fixes: 1. Removed 0xE4F6 device ID check to fix NPAR display 2. Fixed CQ 84404 Bootcfg restore fives seg fault with QCScli RPC. Also requires dynamic link for libxml 3. Cont00084694 - Not able to create team on BCM57840 Sirius card 4. Cont00084817 - QCSCLI with RPC/local shows MF "Feature not supported" under Win 2012R2 5. Cont00084817 - QCSCLI with RPC fails t configure MR under Win 2012R2 Version 30.0.15 (January 30, 2016) ----------------------------------- Fixes: 1. Fixed CQ 084315 Unable to connect remote host with Hostname through RPC using QCSCLI 2. Cont84400 fix part 2 (RPC fix) 3. Added dos2unix on qlgc_pci.ids file. Fixes CQ84394. 4. Fixed Cont00084404 - Bootcfg restore gives seg fault with QCScli RPC connection 5. Fixed Cont00084405 - Restoring advanced params gives seg fault with QCScli RPC 6. Removed username and port from addhost/disccoverhost help on CLI 7. Removed speedDuplex from VBD level 8. Cont00084275 - QCSCLI_RPC fails to set max_chains_per_vf at EVBD under Windows 9. Cont00082314 - QCS CLI doesn't have Restore Default option for DCBX Configuration , unlike QCS GUI 10. Cont00084701 - QCS CLI not returning back to proper prompt after executing invlaid command. 11. Fix for Cont00084477 12. Fix for Cont00084685 Version 30.0.14 (January 22, 2016) ----------------------------------- Fixes: 1. Cont00084423 - FFV not displayed 2. PPC LE Fixes 3. Cont00084267 - NDIS Parameters mismatch between QCCGUI an QCSCLI 4. Cont00084289 - QCSCLI is not asking for reboot after updating SRIOV 5. Cont00084400 - QCSCLI shows wrong qlasp driver status on Linux 6. Cont00084398 - QCSCLI shows wrong banner timeout info 7. Cont00084367 - QCSCLI always displays Flow Control as Disabled in NDIS on 25G 8. Removed max_chains_per_vf from NDIS level 9. Fixed MAX_E4_VFs in SF mode 10. Cont00084093 - QCCGUI/QCSCLI RPC don't have option to set VFs per PF on NPAR Functions on E4 under Windows 11. Fixed BW weights Version 30.0.13 (January 19, 2016) ----------------------------------- Fixes: 1. QLmapi fix Version 30.0.12 (January 15, 2016) ----------------------------------- Fixes: 1. Cont00084093 - QCCGUI/QCSCLI RPC don't have option to set VFs per PF on NPAR Functions on E4 under Windows Version 30.0.11 (January 8, 2016) ----------------------------------- Fixes: 1. Updated SRIOV not supported message when link is down 2. Fixed SF display when in MF mode for E4 3. Relaxed SupportNPAR() check 4. Cont00083702 - QCScli with rpc protocol shows NDIS/VBD devtype in linux 5. Cont00084111 - QCSCLI shows "Configure SRIOV max chains per vf successful" while updating VFs per PF using QCSCLI 6. Cont00084212 - QCSCLI_RPC shows "SRIOV is not supported" under Win 2012 R2 7. Cont00084115 - QCSCLI RPC shows Switch/VM Friendly Names wrong under Windows 8. Cont00083988 - Added 10G and 25G to QCC/QCS Version 30.0.10 (December 23, 2015) ----------------------------------- Fixes: 1. Cont00083615 - Removed max chains per vf from adapter level 2. Cont00082904 - Fixed invalid advanced param message 3. Fixed cfg multi-function command crash 4. Cont00083998 - QCSCLI RPC 30.0.9 crashes while displaying NDIS params after config 5. Fixed CLI BCM57800 device management Version 30.0.9 (December 11, 2015) ----------------------------------- Fixes: 1. Merged in CIM E4 branch changes 2. Cont00082714 - Hiding MBA config for 3rd party adapters 3. Cont00083820 - Mismatch VF Chains pool size on E4 4. Cont00083905 - Brussel E4 QLE8562 got corrupted one port when changed from NPAR to SF mode 5. Cont00083615 - Configure SRIOV max chains per vf fails using QCSCLI RPC 30.0.7 on Windows Version 30.0.8 (December 4, 2015) ----------------------------------- Fixes: 1. Cont00083736 - To change display message "Failed to get the active multi-function" regarding multifunction on 100G adapter in QCSCLI RPC 2. Cont00083737 - QCSCLI RPC displays SRIOV info on 100G adapter under Windows Version 30.0.7 (November 20, 2015) ----------------------------------- Fixes: 1. Removed Bmapi libraries dependency. Version 30.0.6 (November 13, 2015) ----------------------------------- Fixes: 1. Added update password functionality to CLI Version 30.0.5 (November 6, 2015) ----------------------------------- Fixes: 1. Rebranded a few missed BASP strings 2. Fixed CLI NDIS advanced config 3. Disabled password textbox when connecting to localhost 4. Added GUI set password 5. Removed SRIOV info from iSCSI/FCoE on E4 Version 30.0.4 (October 30, 2015) ----------------------------------- Initial QCS CLI release. Fixes ================= N/A - initial release Enhancements: ================= N/A - initial release