QLogic FC ESX Command Line Interface (CLI) Plug-in Release Notes Marvell Semiconductor Inc All rights reserved. Table of Contents 1. Change History 2. Known Issues 3. Notices 4. Contacting Support 1. Changes History QLogic FC ESXCLI Plug-in Version 1.0.23: --------------------------------------------------------------- * Add Apps Tool ID in aux image region for 28xx adapters. * Updated FC only quapi library. QLogic FC ESXCLI Plug-in Version 1.0.22: --------------------------------------------------------------- * Add Restore Defaults support. * Add Get Firmware Dump support. * Add Get/Set Beacon support. * Updated SDMAPI v1.03 build 39. * Updated FC only quapi library. QLogic FC ESXCLI Plug-in Version 1.0.21: --------------------------------------------------------------- * Display PCI Bus Max/Negotiated Width and Speed values in Port info command * Allow FEC settings for non-mezz adapters with 16Gbps or unknown speed adapters. * Block FEC for FCoE mode. * Added new 28xx device ids. * Updated FC only quapi library. QLogic FC ESXCLI Plug-in Version 1.0.20: --------------------------------------------------------------- * Fix secondary aux region checksum error seen with 28xx adapters. * Updated FC only quapi library. QLogic FC ESXCLI Plug-in Version 1.0.19: --------------------------------------------------------------- * Allow FEC settings only for 16Gbps and unknown speeds * Added FC Boot Config settings support QLogic FC ESXCLI Plug-in Version 1.0.18: --------------------------------------------------------------- * Fixed primary/secondary region toggle issue for 28xx based adapters for flash, BBCR, FEC and HBA Parameters update. * Updated FC only quapi library. QLogic FC ESXCLI Plug-in Version 1.0.17: --------------------------------------------------------------- * Add new 28xx based device-ids support. * Fixed Klocwork static analysis reported issues. * Updated SDMAPI v1.03 build 37. * Updated FC only quapi library. QLogic FC ESXCLI Plug-in Version 1.0.16: --------------------------------------------------------------- * Add Forward-Error-Correction (FEC) feature support. * Add Buffer-to-Buffer Credits (BBCR) feature support. * Updated SDMAPI v1.03 build 36. QLogic FC ESXCLI Plug-in Version 1.0.15: --------------------------------------------------------------- * Add Personality Change (FC/CNA) support for ISP2031/ISP8031 based adapters. * Add LunsPerTarget HBA Parameter support. * Add Temperature display support for 16GB and above speed supported adapters. * Allow only 10GB speed in CNA mode in HBA Parameters. * Updated FC only quapi library. QLogic FC ESXCLI Plug-in Version 1.0.14: --------------------------------------------------------------- * Fixed NPIV port display issue. * Updated FC only quapi library. QLogic FC ESXCLI Plug-in Version 1.0.13: --------------------------------------------------------------- * Fixed Principal Fabric WWN and Adjacent Fabric WWN display issue in port info command. * Updated SDMAPI v1.03 build 35. * Updated FC only quapi library built with VMware toolchain. QLogic FC ESXCLI Plug-in Version 1.0.12: --------------------------------------------------------------- * Display Principal Fabric WWN and Adjacent Fabric WWN in port info command. * Updated SDMAPI v1.03 build 34. * Updated quapi library. QLogic FC ESXCLI Plug-in Version 1.0.11: --------------------------------------------------------------- * Read MPI and PEP versions based on active image set. * Avoid extra driver bootcode and fw version update call for 28xx adapters. * Updated SDMAPI v1.03 build 33. QLogic FC ESXCLI Plug-in Version 1.0.10: --------------------------------------------------------------- * Use different speed definitions for PortSpeed and PortSupportedSpeed values. * Updated SDMAPI v1.03 build 32. * Updated quapi library. QLogic FC ESXCLI Plug-in Version 1.0.9: --------------------------------------------------------------- * Added VMware namespace and OS version dependencies for Vmware ESX versions. * Updated SDMAPI v1.03 build 28. * Updated quapi library. QLogic FC ESXCLI Plug-in Version 1.0.8: --------------------------------------------------------------- * Added Maximum Speed display support * Set Data Rate value in HBA Parameters based on supported speed values for an adapter * Display flash update error messages for each error code QLogic FC ESXCLI Plug-in Version 1.0.7: --------------------------------------------------------------- * Added Set HBA Parameters support QLogic FC ESXCLI Plug-in Version 1.0.6: --------------------------------------------------------------- * Removed Set HBA Parameters support QLogic FC ESXCLI Plug-in Version 1.0.5: --------------------------------------------------------------- * Added FC VPD Display support. * Added Get/Set HBA Parameters support. QLogic FC ESXCLI Plug-in Version 1.0.4: --------------------------------------------------------------- * Added SFP DMI information support. * Added FC Port Statistics support. * Updated SDMAPI v1.03 build 25. QLogic FC ESXCLI Plug-in Version 1.0.3: --------------------------------------------------------------- * Added target list and target information support. * Added LUN list and LUN information support. QLogic FC ESXCLI Plug-in Version 1.0.2: --------------------------------------------------------------- * Added port list and port information support. * Fixed flash update issues QLogic FC ESXCLI Plug-in Version 1.0.1: --------------------------------------------------------------- * Supports adapter information on classic-Q family of adapters. * Fixed dependent library load issues due to stack executable flag. QLogic FC ESXCLI Plug-in Version 1.0.0: --------------------------------------------------------------- * Initial release * Supports discovery and flash update on classic-Q family of adapters. 2. Known Issues * None. 3. Notices Information furnished in this document is believed to be accurate and reliable. However, Cavium Corporation assumes no responsibility for its use, nor for any infringements of patents or other rights of third parties which may result from its use. Cavium Corporation reserves the right to change product specifications at any time without notice. Applications described in this document for any of these products are only for illustrative purposes. Cavium Corporation makes no representation nor warranty that such applications are suitable for the specified use without further testing or modification. Cavium Corporation assumes no responsibility for any errors that may appear in this document. 4. Contacting Support For further assistance, contact QLogic Technical Support at: http://support.qlogic.com Trademarks Accelera, Accelerating Cluster Performance, InfiniCon Systems, InfiniNIC, InfiniPath, InfiniView, QLA, QLogic, the QLogic logo, ReadyPath, SANdoctor, SANsurfer, and SilverStorm are registered trademarks of Cavium Corporation. All other brand and product names are trademarks or registered trademarks of their respective owners. (c) Copyright 2009-2019. All rights reserved worldwide. QLogic, the QLogic logo, and the Powered by QLogic logo are registered trademarks of Marvell Semiconductor Inc. All other brand and product names are trademarks or registered trademarks of their respective owners.