============================ R E L E A S E N O T E S ============================ Marvell QLogic FC Windows Admin Center Extension for Windows Version 2.2.0 (December 2, 2022) ============================= Following features/fixes are added: 1] FCD-2338: Do not grey out USCM Profile buttons when USCM is disabled 2] FCD-2641: Added support for 'LinkUncorrectableFECCount' for Port and Target USCM Statistics. 3] Added support for Port Driver and Firmware Stats. 4] Added support for Target Stats Tab details Version 2.1.4 (September 2, 2022) ============================= Following features/fixes are added: 1] Added "Refresh" button to "USCM Profile" tab. Version 2.1.3 (August 25, 2022) ============================= Following features/fixes are added: 1] Added support for Cisco Calabrese and Fujitsu Foxboro adapters. 2] FCD-2231: Fixed FEC Status display issue for 16 Gbps speed 3] FCD-2237: Block D-Port test on NVMe BFS system. 4] Removed 'Rekey Count' from Target Information tab. 5] Removed 'Out Of Order Frame Assembly' as per the request from field engineer. 6] Fixed issue of getting NVMe target shown in FCP and UEFI tabs Version 2.1.2 (August 12, 2022) ============================= Following features/fixes are added: 1] FCD-2173 : Fixed issue of configuring NVME Boot setting and Fabric assign Boot Lun for QLE2884/QLE2692 adapters Version 2.1.1 (July 25, 2022) ============================= Following features/fixes are added: 1] Added support for NVMe BFS 2] Added support for IO Throttling 3] Removed 'PUN Clear Count' for Target USCM Statistics. Version 2.1.0 (July 07, 2022) ============================= Following features/fixes are added: 1] Added FC PowerKit Version check. 2] Supported FC PowerKit 2.x.y.z. 3] Storage Controller ID and Storage NQN attributes added for NVMe targets. 4] Added support for NVMe Namespace target tree. Added Namespace ID support. 5] Added Virtual Lane support. Version 2.0.3 (May 11, 2022) ============================= Following features/fixes are added: 1] Updated 'FCP BIOS Boot Selection' attributes to Drive0-Drive3. Version 2.0.2 (May 09, 2022) ============================= Following features/fixes are added: 1] FCD-417 - Added HostNQN and HostID at Port level. 2] Added support for displaying 'FCP Boot BIOS Selection' and 'UEFI Boot Selection' tabs depending upon supported Adapters. 3] Updated 'UEFI Boot Selection' attributes to Drive0-Drive7. Version 2.0.1 (April 14, 2022) ============================= Following features/fixes are added: 1] Added support for UEFI Boot parameters support. 2] Added 'Adapter BIOS' attribute support in FCP Boot BIOS Parameters. 3] Added support for 'No Reboot' after flash update. 4] Removed 'Peer' from Target USCM Statistics. 5] Added DeliveryNoticationEvents and LinkIntegrityEvents to Port USCM Status. Version 2.0.0 (March 28, 2022) ============================= Following features/fixes are added: 1] Updated WAC SDK from Angular 7 to Angular 11. Version 1.1.4 (December 06, 2021) ============================= Following features/fixes are added: 1] FCD-1047 - Added 'Port Name', 'Node Name' and 'Port ID' to DPort Result. Version 1.1.3 (December 02, 2021) ============================= Following features/fixes are added: 1] Fixed typo in Port USCM stats display. 2] Display additional info in DPort Diagnostic test result. Version 1.1.2 (October 27, 2021) ============================= Following features/fixes are added: 1] Added Secure Target info display. Version 1.1.1 (October 20, 2021) ============================= Following features/fixes are added: 1] Added USCM Profile tab. 2] Added D-Port Diagnostic test support. 3] Fixed issue of setting 64 Gbps speed in iiDMA tab for 64 Gbps port. Version 1.1.0 (August 23, 2021) ============================= Following features/fixes are added: 1] Added 64 Gbps speed support. 2] Blocked "Loop Only" Connection Option in HBA Parameters for 64 Gbps adapters. 3] Allow "2112" Frame Size in HBA Parameters for Encryption adapters. 4] Allow iiDMA for FCP targets only (Not supported for NVMe targets). 5] FCD-579: Display WWPN/WWNN/PID as ":" separated and lower hex values. 6] FCD-527: Added Adapter Passthru mode support for Hyper-V Windows VM. Version 1.0.4 (July 22, 2021) ============================= Following features/fixes are added: 1] Disabled updating FC Board Config, FW Preload Table and HBA parameters from DAT file. 2] Enabled production mode support 3] Limit iiDMA speed to maximum Port speed value. 4] Display LUN list in sorted order. 5] Added "QLogic" string in package description, package ID and extension name. Version 1.0.3 (July 02, 2021) ============================= Following features/fixes are added: 1] Following Virtual Port issues fixed: a] Limit Virtual Port spinner value to max Virtual Port count allowed. b] Fixed random Virtual Ports delete issue. 2] Added USCM Statistics Reset button. 3] Display NodeName, PortName, PortID and LinkStatus in Port and Target USCM tabs. Version 1.0.2 (June 18, 2021) ============================= Following features/fixes are added: 1] Following Virtual Port issues fixed: a] On Firefox, user provided number of virtual ports created successfully. b] Added validation for max number of virtual ports. c] Added "Select all Virtual Port(s)" and "Clear all Virtual Port(s)" buttons. d] Display "Delete Virtual Port(s)" button once user selects Virtual port to delete. 2] Fixed BBCR bad status display issue. 3] Fixed additional pop-up message seen on Firefox for HBA Parameters Utility tab. 4] Disabled "Apply" button when FEC in non-modifiable. Version 1.0.1 (June 04, 2021) ============================= Following features/fixes are added: 1] Adapter Level: a] HBA Update: i] FW preload Table Save ii] FC Board Config Save b] Personality Management c] Flash Information 2] Port Level: a] Virtual Port Management b] FEC Management c] BBCR Management d] USCM Refresh e] Parameters i] Utilities * Button to save as a dat file. 3] Target Level: a] USCM Refresh 4] Pop Up Window support for completion messages 5] Tab refresh support for update/refresh operation Version 1.0.0 (May 14, 2021) ============================= Initial release with following features: 1] Discovery of Host, Adapters, Ports, Virtual Ports, Targets and LUNs. 2] Information of Host, Adapters, Ports, Virtual Ports, Targets and LUNs. 3] Host level refresh 4] Adapter supported features: a] HBA Update i] Multi Boot Image ii] FW preload Table iii] FC Board Config 5] Port supported features: a] Parameters i] HBA Parameters ii] FCP Boot Config iii] HBA parameters update using .dat file iv] Restore HBA parameters to defaults b] VPD Information c] Buffer-to-Buffer Credit Recovery (BBCR) display only support d] Universal SAN Congestion Mitigation (USCM) status and statistics display e] SFP DMI Transceiver Details f] Diagnostics i] Beacon ii] Read Diagnostic Port (RDP) display 6] Target supported features: a] Universal SAN Congestion Mitigation (USCM) status and statistics display b] Intelligently Interleaved DMA (iiDMA) ==================== Known Issues: ==================== 1] Web Browser cache/history should be cleared on Firefox before installing FC WAC Extension to avoaid stale data display. 2] Virtual Port list is not shown when ‘Virtual’ tab is selected immediately after refresh. 3] Large value of FEC correctable errors is seen for 64 Gbps adapters. ==================== Contacting Support: ==================== Please feel free to contact Marvell QLogic Support at https://www.marvell.com/support.html for further assistance. For more information, please refer to "Marvell QLogic Fibre Channel QConvergeConsole Extension for Windows Admin Center User's Guide" UserGuide document available on www.marvell.com. Some features in the doc on marvell.com may or may not apply to the OEM SW release, please refer to the QCC CLI UG for the set of supported features for the respective OEM SW release. (c) Copyright 2021-2022. All rights reserved worldwide. Marvell, the Marvell logo is registered trademarks of Marvell Semiconductor Inc. All other brand and product names are trademarks or registered trademarks of their respective owners.